Suction leaks can be a common issue with pool pumps. They can cause a decrease in pressure and prevent the pump from running properly.
Some common causes of suction leaks include a . If you suspect a suction leak, you can follow these steps to identify and fix the problem: cracked pump lid, cracked pipes or valves, low water level, or issues with the o-ring of the strainer basket drain plug or pump lid 1 Check for air bubbles: If you see air bubbles in the pump strainer, it could be a sign of a suction leak. You can also check for low PSI or weak flow from the return jets . 2 Inspect the pump lid: Check the pump lid for any cracks or damage. Make sure the lid is screwed on correctly and seated as it should be . 3 Check the fittings: Inspect the fittings, valves, and plumbing joints for any signs of water coming out when the pump is turned off. This could indicate a leak . 4 Use the smoke trick: You can use the smoke trick to locate the source of a suction side air leak. With the pump running, light an incense stick and slowly scan it over any PVC joints, valve ports, and covers, and pump housing. If the smoke gets drawn in, that will pinpoint the source of one of your leaks . 5 Fix the problem: Once you have identified the source of the suction leak, you can fix it by replacing any damaged fittings or cracked pipes or valves. You can also use a sealant to repair any cracks or leaks . 1
I hope this helps you understand how to identify and fix suction leaks in your pool pump. If you have any further questions, feel free to
Follow us on Social Media! IG:
@admiralpoolservice FB: admiralpoolservices
Keeping the cyanuric acid (CYA) levels in check is crucial for maintaining a healthy and clean pool. CYA, also known as chlorine stabilizer or pool conditioner, is a critical chemical that stabilizes the chlorine in your pool. Without CYA, your chlorine will quickly break down under the sun’s ultraviolet rays.
But having too little or too much CYA in your pool can inhibit your chlorine’s effectiveness and even damage your pool equipment . 1
To maintain the right CYA levels, it’s important to test your pool water regularly and adjust the CYA levels accordingly.
The ideal range for cyanuric acid is between 30 and 50 ppm . If the CYA levels are too low, your chlorine will break down under the sun’s UV rays, leaving your pool unprotected and unsanitized. 1 On the other hand, if the CYA levels are too high, your chlorine’s effectiveness decreases, and you may experience “chlorine demand,” or the inability to maintain chlorine levels 1 . 2 To add cyanuric acid to your pool, fill a bucket with warm water, add a dose of stabilizer to the bucket, and pour the contents of the bucket into the pool . 1 Always make sure to wear proper safety gear when handling cyanuric acid . 2
In summary, maintaining the right CYA levels is essential for keeping your pool clean and healthy. Regular testing and adjustment of CYA levels can help ensure that your pool is properly sanitized and protected from the sun’s UV rays.
blog page at Admiral Pool Service! : 1 Swim University : 2 Pool Research